LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.

TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5

• 

  漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠

  面議

  產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠

• 

  ablestik84-1A導電膠

  面議

  產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠

• 

  淮安高導熱漢高ABLESTIKJM7000導電膠,JM7000導電膠

  面議

  產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠

• 

  蚌埠M4D9-17劃片刀

  面議

  產品名：M4D9-17劃片刀 ,半導體晶圓切割刀

• 

  豐都樂泰AA352UV膠

  面議

  產品名：樂泰AA 352 UV膠,增韌性光固化粘合劑

• 

  瀘州9969AB-3銀膠導電銀膠

  面議

  產品名：9969AB-3銀膠,導電銀膠,導電膠

• 

  臺中M4D9-17劃片刀半導體晶圓切割刀

  面議

  產品名：M4D9-17劃片刀 ,半導體晶圓切割刀

• 

  豐臺樂泰AA352UV膠增韌性光固化粘合劑

  面議

  產品名：樂泰AA 352 UV膠,增韌性光固化粘合劑